Northern Rivers · NSW 2481
Epoxy Flooring Broken Head
Epoxy floor coatings in Broken Head — diamond-ground prep, two-pack epoxy systems and a UV-stable topcoat built for hot slabs and heavy use. Garages, workshops, warehouses and showrooms across Northern Rivers.
Epoxy floor coatings in Broken Head
Most failed epoxy floors we're called out to fix in Broken Head come down to one thing: prep. We diamond-grind every slab back to a clean, open profile, vacuum it dust-free, then repair cracks, joints and pinholes with a fast-cure filler before a drop of resin goes down. That's the difference between a coating that peels in a season and one that's still tight in ten years.
Slabs around Broken Head run hot and often carry heavy vehicle or storage load. We match the system build to the traffic — thicker high-build epoxy where forklifts, trailers or racking are involved, standard build for a domestic double garage.
Broken Head properties sit between rainforest and beach — damp shade on one side, salt and sun on the other. The same detail we bring to painting those homes goes into the floors: masked edges, cut-in coving where it's asked for, and a site left clean.
A standard double garage in Broken Head is typically a 2–3 days install — grind, prime, base coat, flake broadcast, scrape back and topcoat. Walk on it at 24 hours, park on it at 72. Pricing starts around $3,000 for a standard double garage in flake, with a fixed written quote before we book you in.
Systems we install in Broken Head
Decorative flake
Full-broadcast vinyl flake in your colour blend, scraped back and sealed with a UV-stable polyurethane. The go-to for garages — hides dust, hides tyre marks, easy to hose out.
Solid colour epoxy
Two-pack pigmented epoxy in a single clean colour. Best for workshops, storerooms and back-of-house where you want a hard, wipe-clean slab.
Metallic epoxy
Pigment-swirled metallic resin for showrooms, display garages and retail fitouts. Every floor is one-off — we sample the blend with you before install.
Industrial / heavy-duty
High-build epoxy or polyaspartic for warehouses and forklift traffic, with line-marking and safety striping where you need it.
Epoxy flooring Broken Head — common questions
How much does epoxy flooring cost in Broken Head?
A standard double garage in Broken Head generally starts around $3,000 for a full flake system including diamond grinding, repairs and a UV-stable topcoat. Larger workshops and warehouses are priced per square metre after a site measure. Every quote is fixed and written.
How long does an epoxy floor take to install in Broken Head?
2–3 days for a typical residential garage. Commercial floors are staged around your trading hours so you keep operating. Walk-on traffic at 24 hours, light use at 48, vehicles at 72.
Will the epoxy handle heat and heavy traffic in Broken Head?
Yes — we build the system to the load. Heavy-duty epoxy or polyaspartic for forklifts, trailers and racking, and a UV-stable topcoat so western-sun exposure doesn't yellow the finish.
Can you coat over an existing painted or sealed floor in Broken Head?
Almost always we grind it off. Bonding new resin to an old coating is the single most common failure point we see in Northern Rivers. Diamond grinding to sound concrete costs a little more upfront and saves the whole floor.
Do you do commercial and warehouse epoxy in Broken Head?
Yes — workshops, warehouses, gyms, hospitality back-of-house and retail fitouts throughout Broken Head and the wider Northern Rivers. We can include line-marking, safety striping and anti-slip aggregate.
Are you licensed and insured to work in Broken Head?
Yes. NSW Contractor Licence 461243C and QLD Licence 15536255, plus full public liability insurance. Certificates of currency supplied on request before we start on any Broken Head site.
What colours and finishes can I choose?
Flake blends, solid colours and metallic swirls. We bring samples to the Broken Head quote so you can see the blend against your walls and lighting before committing.