Brisbane Southside · QLD 4102
Epoxy Flooring Buranda
Epoxy floor coatings in Buranda — diamond-ground prep, two-pack epoxy systems and a UV-stable topcoat built for hot slabs and heavy use. Garages, workshops, warehouses and showrooms across Brisbane Southside.
Epoxy floor coatings in Buranda
Most failed epoxy floors we're called out to fix in Buranda come down to one thing: prep. We diamond-grind every slab back to a clean, open profile, vacuum it dust-free, then repair cracks, joints and pinholes with a fast-cure filler before a drop of resin goes down. That's the difference between a coating that peels in a season and one that's still tight in ten years.
Slabs around Buranda run hot and often carry heavy vehicle or storage load. We match the system build to the traffic — thicker high-build epoxy where forklifts, trailers or racking are involved, standard build for a domestic double garage.
Buranda is full of character Queenslanders, post-war homes and walk-up unit blocks near the city. The same detail we bring to painting those homes goes into the floors: masked edges, cut-in coving where it's asked for, and a site left clean.
A standard double garage in Buranda is typically a 3 days install — grind, prime, base coat, flake broadcast, scrape back and topcoat. Walk on it at 24 hours, park on it at 72. Pricing starts around $3,100 for a standard double garage in flake, with a fixed written quote before we book you in.
Systems we install in Buranda
Solid colour epoxy
Two-pack pigmented epoxy in a single clean colour. Best for workshops, storerooms and back-of-house where you want a hard, wipe-clean slab.
Decorative flake
Full-broadcast vinyl flake in your colour blend, scraped back and sealed with a UV-stable polyurethane. The go-to for garages — hides dust, hides tyre marks, easy to hose out.
Metallic epoxy
Pigment-swirled metallic resin for showrooms, display garages and retail fitouts. Every floor is one-off — we sample the blend with you before install.
Industrial / heavy-duty
High-build epoxy or polyaspartic for warehouses and forklift traffic, with line-marking and safety striping where you need it.
Epoxy flooring Buranda — common questions
How much does epoxy flooring cost in Buranda?
A standard double garage in Buranda generally starts around $3,100 for a full flake system including diamond grinding, repairs and a UV-stable topcoat. Larger workshops and warehouses are priced per square metre after a site measure. Every quote is fixed and written.
How long does an epoxy floor take to install in Buranda?
3 days for a typical residential garage. Commercial floors are staged around your trading hours so you keep operating. Walk-on traffic at 24 hours, light use at 48, vehicles at 72.
Will the epoxy handle heat and heavy traffic in Buranda?
Yes — we build the system to the load. Heavy-duty epoxy or polyaspartic for forklifts, trailers and racking, and a UV-stable topcoat so western-sun exposure doesn't yellow the finish.
Can you coat over an existing painted or sealed floor in Buranda?
Almost always we grind it off. Bonding new resin to an old coating is the single most common failure point we see in Brisbane Southside. Diamond grinding to sound concrete costs a little more upfront and saves the whole floor.
Do you do commercial and warehouse epoxy in Buranda?
Yes — workshops, warehouses, gyms, hospitality back-of-house and retail fitouts throughout Buranda and the wider Brisbane Southside. We can include line-marking, safety striping and anti-slip aggregate.
Are you licensed and insured to work in Buranda?
Yes. NSW Contractor Licence 461243C and QLD Licence 15536255, plus full public liability insurance. Certificates of currency supplied on request before we start on any Buranda site.
What colours and finishes can I choose?
Flake blends, solid colours and metallic swirls. We bring samples to the Buranda quote so you can see the blend against your walls and lighting before committing.