Tweed Coast · NSW 2484
Epoxy Flooring Uki
Epoxy floor coatings in Uki — diamond-ground prep, two-pack epoxy systems and a UV-stable topcoat built for coastal humidity and salt air. Garages, workshops, warehouses and showrooms across Tweed Coast.
Epoxy floor coatings in Uki
Most failed epoxy floors we're called out to fix in Uki come down to one thing: prep. We diamond-grind every slab back to a clean, open profile, vacuum it dust-free, then repair cracks, joints and pinholes with a fast-cure filler before a drop of resin goes down. That's the difference between a coating that peels in a season and one that's still tight in ten years.
Uki slabs sit close to the water, so moisture drive and salt-laden air are the real enemies. We moisture-test the concrete first and specify a moisture-tolerant primer when readings call for it — otherwise the coating lifts from underneath no matter how good the topcoat is.
Uki sits in the shadow of Wollumbin, where high rainfall and heavy shade mean mould, lichen and swollen timber. The same detail we bring to painting those homes goes into the floors: masked edges, cut-in coving where it's asked for, and a site left clean.
A standard double garage in Uki is typically a 2–3 days install — grind, prime, base coat, flake broadcast, scrape back and topcoat. Walk on it at 24 hours, park on it at 72. Pricing starts around $3,300 for a standard double garage in flake, with a fixed written quote before we book you in.
Systems we install in Uki
Industrial / heavy-duty
High-build epoxy or polyaspartic for warehouses and forklift traffic, with line-marking and safety striping where you need it.
Decorative flake
Full-broadcast vinyl flake in your colour blend, scraped back and sealed with a UV-stable polyurethane. The go-to for garages — hides dust, hides tyre marks, easy to hose out.
Solid colour epoxy
Two-pack pigmented epoxy in a single clean colour. Best for workshops, storerooms and back-of-house where you want a hard, wipe-clean slab.
Metallic epoxy
Pigment-swirled metallic resin for showrooms, display garages and retail fitouts. Every floor is one-off — we sample the blend with you before install.
Epoxy flooring Uki — common questions
How much does epoxy flooring cost in Uki?
A standard double garage in Uki generally starts around $3,300 for a full flake system including diamond grinding, repairs and a UV-stable topcoat. Larger workshops and warehouses are priced per square metre after a site measure. Every quote is fixed and written.
How long does an epoxy floor take to install in Uki?
2–3 days for a typical residential garage. Commercial floors are staged around your trading hours so you keep operating. Walk-on traffic at 24 hours, light use at 48, vehicles at 72.
Does salt air and humidity in Uki affect epoxy?
It affects the concrete more than the coating. We moisture-test the slab and use a moisture-tolerant primer where needed, then finish with a UV-stable polyurethane so the colour doesn't yellow near open roller doors.
Can you coat over an existing painted or sealed floor in Uki?
Almost always we grind it off. Bonding new resin to an old coating is the single most common failure point we see in Tweed Coast. Diamond grinding to sound concrete costs a little more upfront and saves the whole floor.
Do you do commercial and warehouse epoxy in Uki?
Yes — workshops, warehouses, gyms, hospitality back-of-house and retail fitouts throughout Uki and the wider Tweed Coast. We can include line-marking, safety striping and anti-slip aggregate.
Are you licensed and insured to work in Uki?
Yes. NSW Contractor Licence 461243C and QLD Licence 15536255, plus full public liability insurance. Certificates of currency supplied on request before we start on any Uki site.
What colours and finishes can I choose?
Flake blends, solid colours and metallic swirls. We bring samples to the Uki quote so you can see the blend against your walls and lighting before committing.