How much does epoxy flooring cost in Tweed Heads?

Epoxy floors in Tweed Heads usually run $60–$120 per square metre installed, depending on the existing slab condition, grinding and moisture testing required, and whether you choose flake, metallic or a plain solid colour.

How long before I can drive on a new epoxy floor?

Foot traffic is generally fine after 24 hours and vehicle traffic after 5–7 days. Full chemical cure takes about a week in Tweed Heads's humidity, so we schedule the job around when you need the space back.

Does the concrete have to be ground first?

Yes — diamond grinding the slab is what gives epoxy something to key into. Roll-on kits applied over sealed or dusty concrete are the most common reason coatings peel.

Are you licensed and insured to work in Tweed Heads?

Yes. Munn & Co. Finishes holds an NSW painting licence and a QLD QBCC licence, and we carry full public liability insurance. Licence and insurance details are supplied in writing with every Tweed Heads quote.

How do I get a quote for epoxy floor maintenance in Tweed Heads?

Call 0400 000 000 or send the online quote form. We book a free on-site walkthrough in Tweed Heads, then send a fixed written quote — surfaces, products, coats and timeline — usually within 24–48 hours.

Epoxy Flooring · Tweed Heads

How to Maintain an Epoxy Floor — Cleaning, Repairs and Recoating

Epoxy is low maintenance, not no maintenance. A few simple habits add years to the finish.

Everyday cleaning

Soft broom or dust mop weekly, then a mop with warm water and a pH-neutral cleaner. Avoid citrus and vinegar-based cleaners, and never use a steel-wool pad — they dull the topcoat and leave micro-scratches that hold dirt.

What actually damages epoxy

The usual culprits in coastal garages and workshops.

Grit dragged in under tyres, acting like sandpaper
Hot tyre pickup from parking straight after a long drive
Battery acid, brake fluid and solvent spills left to sit
Dropped tools and jack stands without a pad

Repairing chips and scratches

Small chips can be ground back locally, primed and patched with matching resin, then blended with a fresh topcoat over the panel. Flake floors hide patch repairs remarkably well.

When to recoat

Most residential floors want a fresh clear coat at the 8–12 year mark, sooner in a busy workshop. Recoating a sound floor is a light abrade and one clear coat — a fraction of the cost of a full rebuild.

Get a free quote from a licensed epoxy flooring in Tweed Heads

Munn & Co. Finishes is fully licensed in NSW (461243C) and QLD (15536255), insured and based locally — so we can usually quote Tweed Heads jobs within 24–48 hours. Call 0444 528 452 or request a free written quote online and we'll walk the job with you, photograph problem areas and send a clear, fixed-price scope before any work begins.

Request a free quote More guides

Epoxy floor maintenance — frequently asked questions

How much does epoxy flooring cost in Tweed Heads?: Epoxy floors in Tweed Heads usually run $60–$120 per square metre installed, depending on the existing slab condition, grinding and moisture testing required, and whether you choose flake, metallic or a plain solid colour.
How long before I can drive on a new epoxy floor?: Foot traffic is generally fine after 24 hours and vehicle traffic after 5–7 days. Full chemical cure takes about a week in Tweed Heads's humidity, so we schedule the job around when you need the space back.
Does the concrete have to be ground first?: Yes — diamond grinding the slab is what gives epoxy something to key into. Roll-on kits applied over sealed or dusty concrete are the most common reason coatings peel.
Are you licensed and insured to work in Tweed Heads?: Yes. Munn & Co. Finishes holds an NSW painting licence and a QLD QBCC licence, and we carry full public liability insurance. Licence and insurance details are supplied in writing with every Tweed Heads quote.
How do I get a quote for epoxy floor maintenance in Tweed Heads?: Call 0400 000 000 or send the online quote form. We book a free on-site walkthrough in Tweed Heads, then send a fixed written quote — surfaces, products, coats and timeline — usually within 24–48 hours.