Gold Coast · QLD 4217
Epoxy Flooring Benowa
Epoxy floor coatings in Benowa — diamond-ground prep, two-pack epoxy systems and a UV-stable topcoat built for coastal humidity and salt air. Garages, workshops, warehouses and showrooms across Gold Coast.
Epoxy floor coatings in Benowa
Most failed epoxy floors we're called out to fix in Benowa come down to one thing: prep. We diamond-grind every slab back to a clean, open profile, vacuum it dust-free, then repair cracks, joints and pinholes with a fast-cure filler before a drop of resin goes down. That's the difference between a coating that peels in a season and one that's still tight in ten years.
Benowa slabs sit close to the water, so moisture drive and salt-laden air are the real enemies. We moisture-test the concrete first and specify a moisture-tolerant primer when readings call for it — otherwise the coating lifts from underneath no matter how good the topcoat is.
Benowa's mix of 80s brick homes and golf-estate residences means steady demand for full exterior repaints — render, trim, eaves and fences — plus interior repaints ahead of sale. The same detail we bring to painting those homes goes into the floors: masked edges, cut-in coving where it's asked for, and a site left clean.
A standard double garage in Benowa is typically a 2–4 days install — grind, prime, base coat, flake broadcast, scrape back and topcoat. Walk on it at 24 hours, park on it at 72. Pricing starts around $3,000 for a standard double garage in flake, with a fixed written quote before we book you in.
Systems we install in Benowa
Metallic epoxy
Pigment-swirled metallic resin for showrooms, display garages and retail fitouts. Every floor is one-off — we sample the blend with you before install.
Decorative flake
Full-broadcast vinyl flake in your colour blend, scraped back and sealed with a UV-stable polyurethane. The go-to for garages — hides dust, hides tyre marks, easy to hose out.
Solid colour epoxy
Two-pack pigmented epoxy in a single clean colour. Best for workshops, storerooms and back-of-house where you want a hard, wipe-clean slab.
Industrial / heavy-duty
High-build epoxy or polyaspartic for warehouses and forklift traffic, with line-marking and safety striping where you need it.
Epoxy flooring Benowa — common questions
How much does epoxy flooring cost in Benowa?
A standard double garage in Benowa generally starts around $3,000 for a full flake system including diamond grinding, repairs and a UV-stable topcoat. Larger workshops and warehouses are priced per square metre after a site measure. Every quote is fixed and written.
How long does an epoxy floor take to install in Benowa?
2–4 days for a typical residential garage. Commercial floors are staged around your trading hours so you keep operating. Walk-on traffic at 24 hours, light use at 48, vehicles at 72.
Does salt air and humidity in Benowa affect epoxy?
It affects the concrete more than the coating. We moisture-test the slab and use a moisture-tolerant primer where needed, then finish with a UV-stable polyurethane so the colour doesn't yellow near open roller doors.
Can you coat over an existing painted or sealed floor in Benowa?
Almost always we grind it off. Bonding new resin to an old coating is the single most common failure point we see in Gold Coast. Diamond grinding to sound concrete costs a little more upfront and saves the whole floor.
Do you do commercial and warehouse epoxy in Benowa?
Yes — workshops, warehouses, gyms, hospitality back-of-house and retail fitouts throughout Benowa and the wider Gold Coast. We can include line-marking, safety striping and anti-slip aggregate.
Are you licensed and insured to work in Benowa?
Yes. NSW Contractor Licence 461243C and QLD Licence 15536255, plus full public liability insurance. Certificates of currency supplied on request before we start on any Benowa site.
What colours and finishes can I choose?
Flake blends, solid colours and metallic swirls. We bring samples to the Benowa quote so you can see the blend against your walls and lighting before committing.