Gold Coast · QLD 4211
Epoxy Flooring Carrara
Epoxy floor coatings in Carrara — diamond-ground prep, two-pack epoxy systems and a UV-stable topcoat built for coastal humidity and salt air. Garages, workshops, warehouses and showrooms across Gold Coast.
Epoxy floor coatings in Carrara
Most failed epoxy floors we're called out to fix in Carrara come down to one thing: prep. We diamond-grind every slab back to a clean, open profile, vacuum it dust-free, then repair cracks, joints and pinholes with a fast-cure filler before a drop of resin goes down. That's the difference between a coating that peels in a season and one that's still tight in ten years.
Carrara slabs sit close to the water, so moisture drive and salt-laden air are the real enemies. We moisture-test the concrete first and specify a moisture-tolerant primer when readings call for it — otherwise the coating lifts from underneath no matter how good the topcoat is.
Carrara's townhouses and family estates generate a lot of interior repaints between tenants and full exteriors on render and trim. The same detail we bring to painting those homes goes into the floors: masked edges, cut-in coving where it's asked for, and a site left clean.
A standard double garage in Carrara is typically a 2–4 days install — grind, prime, base coat, flake broadcast, scrape back and topcoat. Walk on it at 24 hours, park on it at 72. Pricing starts around $3,000 for a standard double garage in flake, with a fixed written quote before we book you in.
Systems we install in Carrara
Metallic epoxy
Pigment-swirled metallic resin for showrooms, display garages and retail fitouts. Every floor is one-off — we sample the blend with you before install.
Decorative flake
Full-broadcast vinyl flake in your colour blend, scraped back and sealed with a UV-stable polyurethane. The go-to for garages — hides dust, hides tyre marks, easy to hose out.
Solid colour epoxy
Two-pack pigmented epoxy in a single clean colour. Best for workshops, storerooms and back-of-house where you want a hard, wipe-clean slab.
Industrial / heavy-duty
High-build epoxy or polyaspartic for warehouses and forklift traffic, with line-marking and safety striping where you need it.
Epoxy flooring Carrara — common questions
How much does epoxy flooring cost in Carrara?
A standard double garage in Carrara generally starts around $3,000 for a full flake system including diamond grinding, repairs and a UV-stable topcoat. Larger workshops and warehouses are priced per square metre after a site measure. Every quote is fixed and written.
How long does an epoxy floor take to install in Carrara?
2–4 days for a typical residential garage. Commercial floors are staged around your trading hours so you keep operating. Walk-on traffic at 24 hours, light use at 48, vehicles at 72.
Does salt air and humidity in Carrara affect epoxy?
It affects the concrete more than the coating. We moisture-test the slab and use a moisture-tolerant primer where needed, then finish with a UV-stable polyurethane so the colour doesn't yellow near open roller doors.
Can you coat over an existing painted or sealed floor in Carrara?
Almost always we grind it off. Bonding new resin to an old coating is the single most common failure point we see in Gold Coast. Diamond grinding to sound concrete costs a little more upfront and saves the whole floor.
Do you do commercial and warehouse epoxy in Carrara?
Yes — workshops, warehouses, gyms, hospitality back-of-house and retail fitouts throughout Carrara and the wider Gold Coast. We can include line-marking, safety striping and anti-slip aggregate.
Are you licensed and insured to work in Carrara?
Yes. NSW Contractor Licence 461243C and QLD Licence 15536255, plus full public liability insurance. Certificates of currency supplied on request before we start on any Carrara site.
What colours and finishes can I choose?
Flake blends, solid colours and metallic swirls. We bring samples to the Carrara quote so you can see the blend against your walls and lighting before committing.